lok-kok
05-19-2007, 11:08 AM
Mọi người ơi. Mình đang muốn cài lại Domaincontroller mà nhiều user quá. mọi người chỉ cho mình cách backup các user này để sau khi cài domaincontroller lại mình có thể import các user này lại với. cám ơn mọi người.:(
View Full Version : back up user trong domain.
daodaohoas
05-19-2007, 11:21 AM
Bạn có thể sử dụng NTBackup trong window!
alika
05-19-2007, 11:24 AM
Bạn dùng LDIF mà export ra chi tiết xem tại đây
http://support.microsoft.com/kb/237677
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/directory/activedirectory/stepbystep/adbulk.mspx
http://support.microsoft.com/kb/237677
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/directory/activedirectory/stepbystep/adbulk.mspx
lok-kok
05-19-2007, 01:16 PM
Bạn ơi. Mình cài DC trên một PC thường. Nếu mình dùng cách Ghost Partition có khả thi không nhỉ ?
tahomam
05-19-2007, 03:24 PM
tất nhiên là được rồi. tốt nhất dùng Mirror disk đi, an toàn hiệu quả, đảm bảo các thông tin được cập nhật liên tục so với bản gốc của ổ cứng cũ
còn không dùng ghost cũng được ( dùng Acronis trong hiren mà ghost)
còn không dùng ghost cũng được ( dùng Acronis trong hiren mà ghost)
lok-kok
05-20-2007, 04:01 PM
Bạn ơi. Dùng mirror disk kiểu gì vậy.?? Máy của mình chỉ là một PC thường cài hệ điều hành Server thôi mà, làm mirror kiểu gì, bạn chỉ cho mình được không ?:( .
tahomam
05-20-2007, 05:04 PM
Set Up the Disk Management System
1. Right-click My Computer , and then click Manage to open the Computer Management tool.
2. Expand the Storage node.
3. Click Disk Management.
4. On the View menu, point to Top, and then click to select Disk List. In the right pane, the attributes of each disk in the system are displayed.
5. On the View menu, point to Bottom, and then click to select Graphical View. At the bottom of the right pane, a color-coded graphical view of the disks on the system is displayed:• Disk description panel: The disk description panel, which is gray, is located to the left of the volume description, which is in color. The disk description contains information about each disk's disk number, basic or dynamic configuration, its size, and online or offline status.
• Volume description panel: The volume description panels are color-coded. They hold information on each volume such as the drive letter (if assigned), allocated or unallocated, the partition or volume size, and the health status of the volume.
Back to the top
Upgrade to Dynamic Disks
Raid systems require Dynamic disks under Windows 2000. Any disks that you are upgrading must contain at least 1 megabyte (MB) of free space at the end of the disk for the upgrade to succeed. Disk Management automatically reserves this free space when creating partitions or volumes on a disk, but disks with partitions or volumes that are created by other operating systems may not have this free space available.
NOTE: You must be logged on as an administrator or a member of the Administrators group to complete this procedure. If your computer is connected to a network, network policy settings may also prevent you from completing this procedure.
To upgrade a basic disk to a dynamic disk: 1. Before you upgrade disks, close any programs that are running on those disks.
2. Right-click the gray disk description panel, and then click Upgrade to Dynamic Disk.
3. If the second disk in not a dynamic disk, follow these steps to upgrade it to a dynamic disk.
Back to the top
Mirror the Boot and System Volume
In this scenario, disk 1 is the disk on which the image of disk 0 will be mirrored.
NOTE: Partitions are referred to as volumes when the disks are dynamic. 1. Disk 1 must be unallocated space before you can proceed with mirroring.
2. Right-click disk 0, which contains the boot and system files, and then click Add Mirror.
3. A dialog box opens in which any disk on your system that is available for mirroring will be displayed. Under Select a disk to use as the mirrored space for Boot and System, select the disk of your choice (in this example, it is Disk 1), and then click Add Mirror.
Both Disk 0 and Disk 1 will now have the same color code, the same drive letter, and the volumes will have the status note "Regenerating" displayed while the information is being copied from the first disk to the second disk. The volume of the new mirror will automatically be sized by the system to the same size as that of the original boot and system volume.
4. After you receive the following message, click OK to acknowledge it:
DISK MANAGEMENT
You have mirrored your boot volume. To be able to boot from the mirrored disk, add the appropriate entry to the boot.ini file.
5. If you now want to boot from the new mirrored disk, you have to change the Boot.ini ARC path that points the computer to the partition in which the system files are located.
More detail pls visit MS site http://support.microsoft.com/kb/302969
1. Right-click My Computer , and then click Manage to open the Computer Management tool.
2. Expand the Storage node.
3. Click Disk Management.
4. On the View menu, point to Top, and then click to select Disk List. In the right pane, the attributes of each disk in the system are displayed.
5. On the View menu, point to Bottom, and then click to select Graphical View. At the bottom of the right pane, a color-coded graphical view of the disks on the system is displayed:• Disk description panel: The disk description panel, which is gray, is located to the left of the volume description, which is in color. The disk description contains information about each disk's disk number, basic or dynamic configuration, its size, and online or offline status.
• Volume description panel: The volume description panels are color-coded. They hold information on each volume such as the drive letter (if assigned), allocated or unallocated, the partition or volume size, and the health status of the volume.
Back to the top
Upgrade to Dynamic Disks
Raid systems require Dynamic disks under Windows 2000. Any disks that you are upgrading must contain at least 1 megabyte (MB) of free space at the end of the disk for the upgrade to succeed. Disk Management automatically reserves this free space when creating partitions or volumes on a disk, but disks with partitions or volumes that are created by other operating systems may not have this free space available.
NOTE: You must be logged on as an administrator or a member of the Administrators group to complete this procedure. If your computer is connected to a network, network policy settings may also prevent you from completing this procedure.
To upgrade a basic disk to a dynamic disk: 1. Before you upgrade disks, close any programs that are running on those disks.
2. Right-click the gray disk description panel, and then click Upgrade to Dynamic Disk.
3. If the second disk in not a dynamic disk, follow these steps to upgrade it to a dynamic disk.
Back to the top
Mirror the Boot and System Volume
In this scenario, disk 1 is the disk on which the image of disk 0 will be mirrored.
NOTE: Partitions are referred to as volumes when the disks are dynamic. 1. Disk 1 must be unallocated space before you can proceed with mirroring.
2. Right-click disk 0, which contains the boot and system files, and then click Add Mirror.
3. A dialog box opens in which any disk on your system that is available for mirroring will be displayed. Under Select a disk to use as the mirrored space for Boot and System, select the disk of your choice (in this example, it is Disk 1), and then click Add Mirror.
Both Disk 0 and Disk 1 will now have the same color code, the same drive letter, and the volumes will have the status note "Regenerating" displayed while the information is being copied from the first disk to the second disk. The volume of the new mirror will automatically be sized by the system to the same size as that of the original boot and system volume.
4. After you receive the following message, click OK to acknowledge it:
DISK MANAGEMENT
You have mirrored your boot volume. To be able to boot from the mirrored disk, add the appropriate entry to the boot.ini file.
5. If you now want to boot from the new mirrored disk, you have to change the Boot.ini ARC path that points the computer to the partition in which the system files are located.
More detail pls visit MS site http://support.microsoft.com/kb/302969
xuanthu1326
06-08-2007, 11:05 AM
nói để dễ hiểu là nếu main của bạn hỗ trợ RAID thì bạn nên mua thêm một ổ cứng nữa, setup RAID1, tạo Mirror cho server của bạn như tohumam hướng dẫn, googluck
zestly
07-31-2007, 04:52 PM
Backup user trong AD mình nghĩ cách tốt nhất là cài thêm một máy, cấu hình nó làm Backup Domain Controller là cool nhất, an toàn lại dễ trong việc phòng chống thảm họa :D
